Visonic POWERMASTER-10 - INSTALLER GUIDE Uživatelská příručka stáhnout pdf (Strana 36)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10/30 G2 User's Guide 35

If the control panel is PowerMaster-10 G2 or PowerMaster-30 G2 without Voice option, the display reads

Redial attempts

You can now, select other options, end this session – (see section B.1 and section B.2), or quit

programming (see section B.3).

B.12 Enabling / Disabling the Squawk Option

The PowerMaster system (and its wireless sirens) can be set to produce a short "Squawk" of audible feedback

to assist you when you use your keyfob to arm (1 beep) and disarm (2 beeps) the PowerMaster system

(operates in a similar manner to a car alarm).

 Here you can enable / disable the Squawk.



Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of this section.

Enter the [USER SETTINGS] menu, select the [SQUAWK] option and press

The display shows the currently selected setting.

Click the or button until the display reads the desired

setting, for example, "Squawk OFF" and press the button to

confirm.

☺ Return to step 1

A "Happy Tune" ☺ sounds. The display confirms the saved setting, and

then returns to the User Settings menu, step 1.

3, 4

Additional Information (section B.12)

For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.

a. The display shows the currently selected setting (indicated by a



symbol), for example, [

Squawk ON

b. You can now enable (ON) or disable (OFF) the Squawk option using the or button.

The



symbol now appears next to the new selected option.

You can now select another option in the User Settings menu (see section B.1 and section B.2), or quit

programming (see section B.3).

B.13 Programming the Scheduler

The PowerMaster system includes a PGM output that can be used to open and close an electrically-controlled

gate, or to control a preferred electrical device via keyfobs (refer to "Using keyfob transmitters" in Chapter 2) or

according to a programmable weekly time schedule.

 Here you can schedule the PGM output for up to 4 different ON/OFF time activations per any desired day or

days of the week. In addition, you can schedule a "Daily" schedule that applies to every day of the week. It is

recommended to complete the Scheduler table (placed at the end of this section) before programming the

Scheduler.



Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of this section.

A. To Select the Device No.

Enter the [USER SETTINGS] menu, select the [SCHEDULER] option and

press .

When the display reads [PGM], press .

SQUAWK

Squawk ON



Squawk OFF



PGM

SCHEDULER

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 61 62

Komentáře k této Příručce

Žádné komentáře

Visonic POWERMASTER-10 - INSTALLER GUIDE Uživatelská příručka Strana 36

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Visonic POWERMASTER-10 - INSTALLER GUIDE