Visonic POWERMASTER-10 - INSTALLER GUIDE Specifikace stáhnout pdf (Strana 27)

4. POWERMASTER-30 G2 INSTALLATION

26 D-303222 PowerMaster-10/30 G2 Installer's Guide

4.13 Closing the PowerMaster-30 G2 Control Panel

Control panel final closure is shown below.

To Close the Control Panel:

1. Connect the flat cables, between front and back units,

in their respective connectors (up to 3, according to

options).

2. Close the panel and fasten the 2 screws.

3. Switch on the control panel; make sure that the

"Power" indicator on the control panel lights green.

Figure 4.13

- Final Closure

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 81 82

INSTALLER GUIDE 1
PowerMaster-10/30 G2 2
Version 16 2
Installer's Guide 2
1. INTRODUCTION 4
Figure 3.2 –Phone Wiring 10
3.4 GSM Module Installation 11
3.5 PGM-5 Installation 12
Figure 3.6a – Cable Wiring 13
Figure 3.7a - Power Cable 15
Connection 15
Figure 3.9 - Final Closure 17
Figure 4.3a – Phone Wiring 19
Figure 4.6 21
Figure 4.9a –Expander Module 23
Figure 4.9b – Zone 24
and Siren Wiring 24
4.11 Battery Insertion 26
Figure 4.13 27
5. PROGRAMMING 28
 [1] in Step 1 above) 29
5.2.2 Selecting options 29
 or 30
5.4 Zones / Devices 31
Part B - Configuration 32
- Configuring New Devices 33
5.4.3 Deleting a Device 35
5.4.5 Replacing a Device 35
5.5 Control Panel 37
VOICE REPORT 39
SMS REPORT 39
5.6 Communication 44
String Editor Functionality 47
Voice <- -> C.S 51
Ringback time 51
Ambient level 51
Mast. UL/DL code 53
Inst. UL/DL code 53
5.7 PGM Output 54
 Zone B Z:_ _ 55
 Zone C Z:_ _ 55
5.8.2 Record Speech 56
5.9.3 Testing the GSM module 58
5.10 User Settings 59
5.11 Factory Default 59
5.12 Serial Number 59
5.13 Start UL/DL 60
5.14 Partitioning 60
5.15 Operation Mode 60
5.15.3 BS8243 Setup 61
5.15.4 DD243 Setup 62
6. PERIODIC TEST 63
 <location> 65
7. MAINTENANCE 66
7.4 Fuse Replacement 67
8. READING THE EVENT LOG 68
APPENDIX A. Specifications 69
A2. Wireless 70
A3. Electrical 70
A4. Communication 71
A5. Physical Properties 71
(optional) 72
Assignments 73
APPENDIX D. Event Codes 75
D2. SIA Event Codes 76
APPENDIX E. Sabbath Mode 77
APPENDIX F. Glossary 78
Compliance with 80
Standards 80
WARRANTY 81
PowerMaster-30 G2 82

Komentáře k této Příručce

Žádné komentáře

Visonic POWERMASTER-10 - INSTALLER GUIDE Specifikace Strana 27

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Visonic POWERMASTER-10 - INSTALLER GUIDE